You asked: How do I change my BIOS security settings Windows 10?

How do I change BIOS settings?

How Do I Completely Change the BIOS on My Computer?

  1. Restart your computer and look for the keys–or combination of keys–you must press to access your computer’s setup, or BIOS. …
  2. Press the key or combination of keys to access your computer’s BIOS.
  3. Use the “Main” tab to change the system date and time.

Is it dangerous to change BIOS settings?

But be careful in your BIOS or UEFI settings screen!

You should only change settings if you know what they do. It’s possible to make your system unstable or even cause hardware damage by changing certain settings, especially ones related to overclocking.

How do I check my BIOS settings?

If you can’t use a BIOS key and you have Windows 10, you can use the “Advanced startup” feature to get there.

  1. Navigate to Settings.
  2. Click Update & Security.
  3. Select Recovery in the left pane.
  4. Click Restart now under the Advanced startup header.
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Click UEFI Firmware Settings.

How do you get into the BIOS in Windows 10?

F12 key method

  1. Turn the computer on.
  2. If you see an invitation to press the F12 key, do so.
  3. Boot options will appear along with the ability to enter Setup.
  4. Using the arrow key, scroll down and select <Enter Setup>.
  5. Press Enter.
  6. The Setup (BIOS) screen will appear.
  7. If this method does not work, repeat it, but hold F12.
IT IS INTERESTING:  Which certification is best for system administrator?

How do I change BIOS settings in Windows?

How to enter the BIOS on a Windows 10 PC

  1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
  2. Select Update & Security. …
  3. Select Recovery from the left menu. …
  4. Click Restart Now under Advanced startup. …
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Select UEFI Firmware Settings. …
  8. Click Restart.

How do I close BIOS setup?

Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.

What are the important settings in BIOS?

Boot order is the most important adjustable setting in the BIOS. The boot order determines the order in which the computer will boot to each device to look for an operating system or installer. The options typically include the hard drive, optical disk drive, USB and network.

What happens when reset BIOS?

Resetting your BIOS restores it to the last saved configuration, so the procedure can also be used to revert your system after making other changes. Whatever situation you may be dealing with, remember that resetting your BIOS is a simple procedure for new and experienced users alike.

Do I need to change BIOS?

In general, you shouldn’t need to update your BIOS that often. Installing (or “flashing”) a new BIOS is more dangerous than updating a simple Windows program, and if something goes wrong during the process, you could end up bricking your computer.

How do you check if BIOS is working properly?

Method 5: Run a Command Prompt Command

  1. Open Command Prompt. …
  2. Type this command, followed by Enter: wmic bios get smbiosbiosversion.
  3. You should see the BIOS version appear just below the command you entered.
IT IS INTERESTING:  How do I reset my BIOS password on my HP laptop?

How do I know if I have UEFI or BIOS?

How to Check If Your Computer Uses UEFI or BIOS

  1. Press Windows + R keys simultaneously to open the Run box. Type MSInfo32 and hit Enter.
  2. On the right pane, find the “BIOS Mode”. If your PC uses BIOS, it will display Legacy. If it is using UEFI so it will display UEFI.

What is UEFI mode?

The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and platform firmware. … UEFI can support remote diagnostics and repair of computers, even with no operating system installed.

Operating systems are simply