On the computer motherboard, locate the BIOS clear or password jumper or DIP switch and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD or PWD. To clear, remove the jumper from the two pins currently covered, and place it over the two remaining jumpers.
How do I reset my CMOS password on my laptop?
Locate the 2-pin CMOS jumper labeled RTCRST on the system board. Move the 2-pin jumper plug from the password jumper to the pins on the CMOS jumper. Plug the power cable to the computer and wait for 10 seconds for the CMOS to clear. Move the 2-pin jumper plug back to the password jumper.
Can you clear CMOS from BIOS?
The easiest way to clear the CMOS is from your computer’s BIOS setup menu. … (If you built your own computer, consult your motherboard’s manual instead.) Within the BIOS, look for the Reset option. It may be named Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.
How do I find my BIOS password?
If you have forgotten the BIOS password, check with the motherboard manufacturer (or your computer dealer) to see whether a backdoor password is available. For example, the Phoenix-brand motherboard has the backdoor password PHOENIX, which you can type at the BIOS password prompt to gain access to the computer.
How do I reset my BIOS to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
Can you clear CMOS without Jumper?
If there is no CLR_CMOS jumpers or [CMOS_SW] button on the motherboard, please follow the steps to clear CMOS: Take out the battery gently and put it aside for about 10 minutes or longer. (Or you can use a metal object to connect the two pins in the battery holder to make them short-circuited.)
Will removing CMOS battery reset BIOS password?
Remove CMOS battery
Removing the CMOS battery, like the one shown in the picture, causes the system to lose all CMOS settings, including the BIOS password.
What key do you press to enter BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.