How do you exit BIOS settings?

Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.

Why cant I exit my BIOS?

If you can’t exit BIOS on your PC, the issue is most likely caused by your BIOS settings. … Enter BIOS, go to Security Options and disable Secure Boot. Now save changes and restart your PC. Enter BIOS again and this time go to Boot section.

How do I get out of UEFI BIOS?

How do I get out of UEFI boot mode?

  1. Hold down the Shift key and click Restart.
  2. Click Troubleshoot → Advanced options → Start-up Settings → Restart.
  3. Tap the F10 key repeatedly (BIOS setup), before the “Startup Menu” opens.
  4. Go to Boot Manager and disable the option Secure Boot.

Why does my PC keep going into BIOS?

If your computer keeps booting to BIOS, the issue may be triggered by the incorrect boot order. … If you find it, set the disk as the primary boot option. If your hard drive listed under boot device cannot be found in BIOS, change this hard disk. Check if the disk is plugged in correctly and can work on another PC.

IT IS INTERESTING:  Your question: What are the 3 most common operating systems?

How do I escape the boot menu?

. Press <Esc> key to exit the <Secure Boot Configurations> menu.

How do I get out of BIOS loop?

Unplug power cable from PSU. Press the power button for 20 seconds. Remove the CMOS battery and wait 5 minutes and insert CMOS battery back. Make sure to connect only the disk where Windows was installed…if you installed Windows while having only one disk on your PC.

How do I adjust BIOS settings?

How to Configure the BIOS Using the BIOS Setup Utility

  1. Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
  2. Use the following keyboard keys to navigate the BIOS Setup Utility: …
  3. Navigate to the item to be modified. …
  4. Press Enter to select the item.

What is UEFI mode?

The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and platform firmware. … UEFI can support remote diagnostics and repair of computers, even with no operating system installed.

How do I get out of BIOS without saving changes?

The Fn keys can be used to issue commands to the UEFI (BIOS). Try pressing F1 and see if it brings up a list of Fn associated commands. Look for “Quit Without Saving Changes”, and press that Fn key. That should get you out of the UEFI and force a re-boot.

How do you reset a UEFI computer?

1. Reset internally from your device’s BIOS or UEFI menu

  1. Navigate to the Settings tab under your Start menu by clicking the gear icon.
  2. Click the Update & Security option and select Recovery from the left sidebar.
  3. You should see a Restart now option below the Advanced Setup heading, click this whenever you’re ready.
IT IS INTERESTING:  Question: What is an app administrator?

How do I stop my PC from automatically going to BIOS?

Disable Fast Boot and set your system drive as the primary option. Access the BIOS utility. Go to Advanced settings, and choose the Boot settings. Disable Fast Boot, save changes and restart your PC.

How do I boot directly into BIOS?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I enter BIOS?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I exit the F12 boot menu?

Use Boot Device Disable

On the Advanced tab, choose Miscellaneous Devices and press enter. Under Miscellaneous devices, the option for Boot Disable must be enabled. After saving settings, the options on the F12 boot menu should be reduced.

How do I remove the boot menu in Windows 10?

Delete Windows 10 Boot Menu Entry with msconfig.exe

  1. Press Win + R on the keyboard and type msconfig into the Run box.
  2. In System Configuration, switch to the Boot tab.
  3. Select an entry you want to delete in the list.
  4. Click on the Delete button.
  5. Click Apply and OK.
  6. Now you can close the System Configuration app.
IT IS INTERESTING:  Is Windows better than Unix?
Operating systems are simply