How do I stop my computer from booting into BIOS?

Disable Fast Boot and set your system drive as the primary option. Access the BIOS utility. Go to Advanced settings, and choose the Boot settings. Disable Fast Boot, save changes and restart your PC.

Why does my computer only boot to BIOS?

If your computer keeps booting to BIOS, the issue may be triggered by the incorrect boot order. Just go to check if there is an appropriate boot device available in BIOS. If you find it, set the disk as the primary boot option. If your hard drive listed under boot device cannot be found in BIOS, change this hard disk.

How do I boot into Windows instead of BIOS?

To boot to UEFI or BIOS:

  1. Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. …
  2. Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.

How do I fix the BIOS on my computer?

Fixing 0x7B Errors at Startup

  1. Shut down the computer and restart it.
  2. Start the BIOS or UEFI firmware setup program.
  3. Change the SATA setting to the correct value.
  4. Save settings and restart the computer.
  5. Select Start Windows Normally if prompted.
IT IS INTERESTING:  Which action can be taken using the Administrative Tools category in the Windows 10 Control Panel?

How do I reset my PC to BIOS?

Reset from Setup Screen

  1. Shut your computer down.
  2. Power your computer back up, and immediately press the key that enters the BIOS setup screen. …
  3. Use the arrow keys to navigate through the BIOS menu to find the option to reset the computer to its default, fall-back or factory settings. …
  4. Restart your computer.

How do I boot directly into BIOS?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I enter BIOS on Windows 10?

How to enter the BIOS on a Windows 10 PC

  1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu. …
  2. Select Update & Security. …
  3. Select Recovery from the left menu. …
  4. Click Restart Now under Advanced startup. …
  5. Click Troubleshoot.
  6. Click Advanced options.
  7. Select UEFI Firmware Settings. …
  8. Click Restart.

How do I open the boot menu in Windows 10?

I – Hold the Shift key and restart



This is the easiest way to access Windows 10 boot options. All you need to do is hold down the Shift key on your keyboard and restart the PC. Open up the Start menu and click on “Power” button to open power options.

How do you check if BIOS is working properly?

Method 5: Run a Command Prompt Command

  1. Open Command Prompt. …
  2. Type this command, followed by Enter: wmic bios get smbiosbiosversion.
  3. You should see the BIOS version appear just below the command you entered.
IT IS INTERESTING:  Can Chrome OS run Linux apps?

Why is my computer not booting up?

Common boot up issues are caused by the following: software that was installed incorrectly, driver corruption, an update that failed, abrupt power outage and the system did not shut down properly. Let’s not forget registry corruption or virus’ / malware infections that can completely mess up a computer’s boot sequence.

Operating systems are simply