How do I fix BIOS settings?

How do I fix the BIOS on my computer?

Fixing 0x7B Errors at Startup

  1. Shut down the computer and restart it.
  2. Start the BIOS or UEFI firmware setup program.
  3. Change the SATA setting to the correct value.
  4. Save settings and restart the computer.
  5. Select Start Windows Normally if prompted.

What to do if BIOS does not work?

If you cannot enter the BIOS setup during boot, follow these steps to clear the CMOS:

  1. Turn off all peripheral devices connected to the computer.
  2. Disconnect the power cord from the AC power source.
  3. Remove the computer cover.
  4. Find the battery on the board. …
  5. Wait one hour, then reconnect the battery.

How do I check for BIOS errors?

How to View a BIOS System Log

  1. Turn on the computer. As the computer is booting up, look toward the bottom of the screen. …
  2. Press the button for “System Log” or “Event Log” on the menu that appears. The menu will offer you a variety of options that are accessed by pressing the indicated buttons.
  3. View the system log.
IT IS INTERESTING:  Why am I not the administrator on my PC?

How do I reset my BIOS to default?

Reset the BIOS to Default Settings (BIOS)

  1. Access the BIOS Setup utility. See Accessing BIOS.
  2. Press the F9 key to automatically load the factory default settings. …
  3. Confirm the changes by highlighting OK, then press Enter. …
  4. To save the changes and exit the BIOS Setup utility, press the F10 key.

How do I get into BIOS if UEFI is missing?

Press Windows key + R to open up a Run dialog box. Then, type “msinfo32” and press Enter to open up the System Information screen. Inside the System Information window, select System Summary from the left-hand side pane. Then, move over to the right pane and scroll down through the items to find BIOS Mode.

Why can’t I get into my BIOS?

Step 1: Go to Start > Settings > Update & Security. Step 2: Under the Recovery window, click Restart now. Step 3: Click Troubleshoot > Advanced options > UEFI Firmware Settings. Step 4: Click Restart and your PC can go to BIOS.

How do I stop BIOS from booting?

Disable Fast Boot and set your system drive as the primary option. Access the BIOS utility. Go to Advanced settings, and choose the Boot settings. Disable Fast Boot, save changes and restart your PC.

How do I fix ACPI BIOS error?

How can I fix the ACPI_BIOS_ERROR BSOD error?

  1. Use a third-party BSoD fixer. …
  2. Remove your SSD and update your BIOS. …
  3. Enter BIOS and disable AHCI. …
  4. Update your drivers. …
  5. Set the ACPI mode to S1 in BIOS. …
  6. Disable the jumper JPME1 and reflash BIOS. …
  7. Uninstall the Microsoft ACPI Compliant driver. …
  8. Install Windows 10 in UEFI mode.
IT IS INTERESTING:  How do I read a Gunzip file in Unix?

How do you clear a BIOS error?

How to reset BIOS settings on Windows PCs

  1. Navigate to the Settings tab under your Start menu by clicking the gear icon.
  2. Click the Update & Security option and select Recovery from the left sidebar.
  3. You should see a Restart now option below the Advanced Setup heading, click this whenever you’re ready.

How do I change BIOS settings?

How Do I Completely Change the BIOS on My Computer?

  1. Restart your computer and look for the keys–or combination of keys–you must press to access your computer’s setup, or BIOS. …
  2. Press the key or combination of keys to access your computer’s BIOS.
  3. Use the “Main” tab to change the system date and time.

How do I boot directly into BIOS?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I reset my BIOS battery?

Steps to clear CMOS using the battery method

  1. Turn off all peripheral devices connected to the computer.
  2. Disconnect the power cord from the AC power source.
  3. Remove the computer cover.
  4. Find the battery on the board. …
  5. Remove the battery: …
  6. Wait 1–5 minutes, then reconnect the battery.
  7. Put the computer cover back on.
Operating systems are simply